Mon-Fri 9a-6p | Sat 10a-4p | Sun CLOSED
On orders over $70*
sE Electronics X1 S Studio Bundle w/ Shockmount & Isolation Filter
Contains:
- X1 S microphone
- RF-X Reflexion Filter®
- Isolation Pack (with pop shield)
- 3-meter mic cable
X1 S TECH SPECS
| Capsule | Hand-Crafted 1" True Condenser |
| Polar Pattern | Cardioid |
| Frequency range | 20 Hz - 20 kHz |
| Sensitivity | 30 mV/Pa (-30.5 dBV) |
| Equivalent noise level | 9 dB(A) |
| Dynamic range | 131 / 141 / 151 dB (0/10/20 dB Attentuation pad) |
| Signal to Noise Ratio | 85 dB |
| Low-cut filter | 80 / 160 Hz, 6 dB/Oct, switchable |
| Attenuation Pad | 10 / 20 dB, switchable |
| Powering | 48 Volts according to IEC 61938 |
| Electrical Impedance | 125 Ohms |
| Recommended load impedance | >1k Ohms |
| Current consumption | 6 mA |
| Connectivity | 3-pin male XLR connector |
| Diameter / Length | 58mm (2.28in) / 169mm (6.65in) |
| Weight | 445 g (15.70 oz) |
*Subject to credit approval. Minimum monthly payments required. See store or click here for details.
