WD 3 Per Side Locking Tuning Machines

This locking 3 Per Side sealed diecast tuning machine set utilizes a string post locking system which is activated on the end of the string post rather than the back of the tuning machine housing. They require (1) mounting screw hole located at approximately 8 O'clock for the bass strings, 4 O'clock for the treble strings.

• Gear Ratio = 14:1
• Peghole requirement = 25/64 in. (10mm)
• String Post Height = 1 1/10 in. (28mm)
• String Post Diameter = 15/16 in. (6mm)
• String Post Collar length = 25/64 in. (10mm)